1. Harmless Soft Plastic Shrink Film Roll Introduction
PLA is a biodegradable plastic produced from renewable resources. For this reason, it is more environmentally friendly than most alternatives. It tends to be more expensive than most conventional shrink labels. Shrink results tend to be less repeatable than with petroleum-based polymers, meaning a more robust process is necessary.
2. Harmless Soft Plastic Shrink Film Roll Technical Data Sheet
| Item | Unit | Test Method | Value |
| Thickness | μm | ASTM D374 | 45 |
| Tensile strength | MD | MPa | ASTM D882 | 96 |
| TD | 128 |
| Elongation | MD | % | ASTM D882 | 50 |
| TD | 88 |
| Heat Shrinkage | MD | % | 100℃/10S | 3.2 |
| TD | 78 |
| Haze | % | ASTM D1003 | 2.9 |
| Transmittance | % | | 93.3 |
| Gloss | % | GB/T 8807(45°) | 77 |
| C.O.F(IN/OUT) | μS/μK | ASTM D1894E | 0.51/0.41 |
| Wet Tension | mN/m | ASTM D2578 | 38 |
| Seaming Strength | N/15mm | | 4.61 |
3. Harmless Soft Plastic Shrink Film Roll Used Primary Markets
- Cosmetics and Beauty Products
- Food & Beverage
- Pharmaceuticals and Horticulture
- Confectionery
- Writing Instruments
- Dairy Products
- Consumer Goods
- Spirits
- Agro Products
- Oil & Lubricants and many more...
4. FAQ
1) Q: Do you accept OEM?
A: Yes, we do.
2) Q: What's your delivery time?
A: It’s according to the quantity of the order. Normally it is between 5 and 20 days.
3) Q: What's your production capacity?
A: About 4000 tons per month.
4) Q: What's your payment term?
A: We accept T/T, L/C, O/A, Western Union, or customized if it is acceptable.
5) Q: Do you provide free sample? And how many days it will take?
A: Samples for testing are available and free. The freight for sample delivery is at receivers's side. But to be refunded by deducting from the right coming order automatically
PLA Shrink film(PLA-1011) (2).pdf
